Permit Requirements for Barney, North Dakota

For Plumbing projects in Barney, determining the correct permitting authority depends on whether the project site is located within the incorporated city limits or in an unincorporated area of Richland County.

Authority Having Jurisdiction (AHJ)

Most jurisdictions require permits for Plumbing work to ensure safety and code compliance. The governing body responsible for issuing these permits varies by specific location:

Within City Limits: The Barney Building Department typically oversees all local building, trade, and safety permits.
Unincorporated Areas: Properties located outside of official city boundaries are generally governed by the Richland County Building & Safety Division.
Calculate a Water Heater Replacement Project in Barney, Richland County, North Dakota
Find Plumber Contractors in Richland County
Find Plumber Contractors in North Dakota

General Plumbing Guidelines

Permits are usually required for new installations, structural modifications, or major repairs. While minor maintenance or cosmetic updates may be exempt, landowners should always verify local codes before work begins.

Help Us Improve This Guide

If you have found a direct link to a permit portal or a specific local ordinance for Plumbing in this area, please submit an update.

Because Barney is located within Richland County, the following broader county regulations may also apply to your project:

North Dakota, Richland County Plumbing Permit Regulations and County Ordinances for Unincorporated Areas

Richland County, North Dakota Plumbing Permit Requirements

In Richland County, North Dakota, building permit authority for unincorporated areas is typically handled at the township level by elected township officers. Zoning and planning authority can also vary by township. If your property is within an incorporated city, that city's building department will handle your permits, not the county. Richland County itself issues building permits only for properties in unincorporated areas of the county.

Rules for Properties in Unincorporated Areas

For properties in unincorporated areas of Richland County, you will need to identify the specific township where your property is located and contact the township clerk or designated official. It is crucial to determine if that township has adopted the North Dakota State Building Code. You will then submit your permit application and required plans to the township. You may also need to coordinate with Richland County for any zoning or regulatory requirements. Permit fees are determined at the township level and vary by jurisdiction.

Structural changes, new construction, and re-roofing generally require permits if the township has adopted the North Dakota State Building Code. However, certain work may be exempt, such as painting, cosmetic maintenance, projects costing less than $2,000, and shingling projects. It is always best to confirm exemptions with your specific township office before starting any work.

North Dakota State Plumbing Code

The state of North Dakota has adopted the 2018 edition of the North Dakota Plumbing Code (NDPC), which is based on the Uniform Plumbing Code (UPC) with state-specific amendments. This code is designed to ensure safe and sanitary plumbing systems while allowing for innovation.

Resources to Learn More

Richland County Commission & Township Offices: https://www.co.richland.nd.us
North Dakota State Plumbing Board: https://www.plumbing.nd.gov/
IAPMO Store (for NDPC): https://iapmomembership.org/store/

The following statewide building codes and regulations apply universally to all jurisdictions within North Dakota:

North Dakota Plumbing Legislation, Codes, and Guidelines

Plumbing Codes and Legislation in North Dakota

The state of North Dakota regulates plumbing installations, licensing, and standards through the North Dakota State Plumbing Board. The state has adopted the 2018 edition of the Uniform Plumbing Code (UPC), published by the International Association of Plumbing and Mechanical Officials (IAPMO), as the basis for the North Dakota Plumbing Code. This code includes specific state-level amendments and is codified under the North Dakota Administrative Code (specifically Article 62-03.1).

Regulatory Authority

The primary agency responsible for setting and enforcing these standards is the North Dakota State Plumbing Board. Established by state law (North Dakota Century Code Chapter 43-18), the Board is empowered to:

Formulate and circulate the state plumbing code.
Prescribe rules and regulations for the examination, regulation, and licensing of all classifications of plumbers (including apprentices, journeymen, and master plumbers).
Supervise and inspect plumbing, drainage, sewage, and ventilation systems in public and private buildings.
Administer licensing for water conditioning and sewer and water installers.

Resources to Learn More

Help Us Improve This Guide

Did you find a dead link, or do you have the direct link to the Barney permit application portal? Help us keep this information accurate by submitting an update.